Home > brass valve > Brass Exhaust Valve > Manual brass valves Pressure control Stainless Steel valves
- Operation T18B-V2
Our factory are good at machining,sample or drawing will be welcome.
We always try to reduce the cost to increase value for customer.
Product Description
1、Technical standard:
1.QUCIK INFO
| Product use: | discharge pressure | connection: | thread |
| Material: | Brass iron | valve opening height: | full Kai type safety valve |
| Structure: | vertical hammer | nominal diameter: | MM |
| Suitable medium: | water | standards: | GB |
| Pressure | pressure |
|
|
Technical Parameter
·Set Pressure(Psi): 75,87,100,125,150psi (0.5,0.6,0.7,0.8,1.0MPa)
·Set Pressure Tolerance: +5%,-10% of the set pressure.
·Set Temperature: From 65°C to99°C. (As you’re required)
·Set Temperature Tolerance: 99°C-5°C; other set Temperature is ±5°C
PS: We can made different type of valves as you’re required.
2、Advantage:
-
How to Installation
·Temperature and Pressure Relief Valves should be installed on the top of the water heater top or side. The Temperature sensing element must be immersed in the water within the top 6″of the tank.
·The eliminating pipeline should be installed under the relief valve. Its terminal station distance in floor drain should be greater than 6″to make it easily remove and observe water.
Direct Installed on the Top Direct Installed in the Side
.How to Safeguard And Maintenance:
·After installing water heater the users must lift the relief valve handle once at least every year, so as to ensure that unblocked things in the waterway of the relief valve.
·Before operating handles, please check the elimination pipeline which joining the relief valve, guaranteed that the hot water from the relief valve discharge the proper place, otherwise it may cause the bodily injury.
·If the handle is lifted, without water flowing out, it proves that the relief valve is invalid. Then it should turn off the water heater immediately and check the valve.
.Warranty time:12 Months.
our company
Packaging & Shipping
1. Shrink bag --> 2. Small Box --> 3. Carton --> 4. Strong Plywood Case
|
FAQ |
|---|
Q: Are You Trading Company Or Manufacturer ?
A: We are factory.
Q: How Long Is Your Delivery Time?
A: Generally it is 3-5 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do You Provide Samples ? Is It Free Or Extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.